|
The FPC Separator machine, which is often referred to as the punching machine, also has the soft board dividing machine. At present, for the flexible FPC board, the laser cutting machine and the pneumatic punching machine are the two main methods.
The FPC Separation machine has the following features:
1. At present, the pneumatic punching machine used in the market mainly uses a mold to perform one-time slitting of a whole piece of flexible PFC board. When buying a pneumatic punching machine, a corresponding set of punching die is required. However, in general, the cost performance of the pneumatic punching machine is still very high, suitable for most electronic manufacturers.
2. Because the depth of the V-groove and the loss of the tool are required, the distance between the upper and lower straight knives can be accurately adjusted, so that the parts can be resolved across the V-groove.
3. The operator can request the addition of conveyor belts to improve performance and ensure production safety.
4. The flexible FPC board separation machine minimizes the internal stress generated when cutting the board and avoids tin cracking. The cutting speed is controlled by the knob, the board stroke can be freely set, and the LCD screen is displayed.
Tel: 86-755-33583456
Fax: 86-755-33580008