FPC ultraviolet laser cutting machine refers to the cutting and dividing of FPC shape by ultraviolet laser cutting equipment, which is an important processing equipment in the field of FPC circuit board industry. For large manufacturers, the amount of one-time investment is relatively large, often more than ten, although such a large company is not short of money, but considering the cost, price is also an important indicator. For SMEs, it is necessary to take into account factors such as returning funds and liquidity. Price factors and payment methods are often more important conditions.

Then the importance of the price of FPC laser cutting machine is so obvious, what are the price factors of FPC UV laser cutting machine? SMTfly analyzes the price factor for the hardware cost of the FPC UV laser cutting machine.

FPC UV Laser Depaneling Equipment-Depaneling of PCBs

FPC laser cutting machine structure

FPC ultraviolet laser cutting machine is an integrated device of components such as light, machine and electricity. The price of the device determines the hardware cost price of FPC laser cutting machine.

1.Laser Head

The laser is the core component of the FPC laser cutting machine. The cutting FPC material is generally a CO2 laser and an ultraviolet laser. The price difference between the two is very large. However, the spot size of the FPC cut by the CO2 laser is large, and the carbonization phenomenon of the cutting edge is relatively serious. The ultraviolet laser is a cold light source, the heat affected area is small, and the spot is small, the carbonization of the cutting edge is light, and the cutting speed is fast, and 24 can be used. The hourly start-up mass production, the current mainstream lasers on the market are all UV laser cutting.

This is why customers sometimes ask why they don't believe in laser cutting machines, saying that the black side of the cutting machine is serious. In fact, most of them use early CO2 cutting equipment. In addition, the price difference is large. Many customers used the engraving machine to cut. I think the price can be achieved in the hundreds of thousands, but in fact the mature FPC laser cutting machine uses the ultraviolet laser. The price of the imported laser is more than 100,000. .

In addition, the prices of various brands on the UV laser are also quite different. At present, the better UV lasers on the market have spectral physics, light waves, general love, and coherence. These brands are used by SMTfly. Due to the differences in stability and functionality of several brands, the price difference is also large. In addition, the higher the power of the laser, the more expensive the price, and the laser model can be selected for different customer needs. , power and brand.

In addition, some manufacturers use domestically produced UV lasers, and the price is quite different. When the disadvantage of domestic lasers is stability and power attenuation is fast, imported lasers are commonly used in the case of high-volume processing requirements.

Lasers are the biggest factor in determining the difference in cost. Different lasers have price differences of even more than 100,000 RMB.

2. galvanometer

The galvanometer can also be collectively referred to as marking head or cutting head. At present, the main products used in the market are imported CTI, SCANLAB, RAYLASE, etc. The domestic brands are mixed, and most of them are imitation galvanometers. The import and domestic prices are very different. Obviously, it is almost 10 times the price, the import is tens of thousands, and the domestic is thousands.

3. Lens

The lens is also called field lens. According to different customer requirements, the lens with different processing width is configured. Generally, the lens size is 60*60mm or 40*40mm lens. The difference from the traditional marking machine lens is FPC UV. The lens of the laser cutting machine is a telecentric lens, the focusing spot is smaller, the heat influence is smaller, and the cost telecentric lens is from the imported product, and the price difference is 60,000 RMB compared with the cost of the domestic lens.

4.CCD positioning camera, linear motor

The same positioning camera and linear motion motor are important indicators of cutting accuracy. Usually the camera and motor are from Taiwan and Japan. Almost all FPC laser cutting machine manufacturers use imported motor and positioning system. The price varies, but the difference is different. Not big.

5. Cabinet, marble platform

Generally speaking, the cabinet and marble platform are customized according to the respective standards of FPC laser cutting machine manufacturers, depending on the processing format. For example, the conventional size of the FPC laser cutting machine of SMTfly is 330X330mm. It can also be customized according to the requirements. There is also a certain price difference, but the difference is not big.

6. Control card, industrial computer

The control cards of the FPC laser cutting machine are all developed by the manufacturers themselves. According to the customer's requirements, combined with the automation requirements, it is a regular configuration. The industrial computer is similar to the computer. The difference is that it needs to be connected to the equipment to control the overall operation. This price is different according to the needs of each company, and it is not a decisive price difference factor.

It can be seen from the above that the price determinant of the FPC laser cutting machine is closely related to the structure of the FPC ultraviolet laser cutting machine, especially the price of the laser and the price difference between the galvanometer and the lens are large, so the customer often purchases the FPC ultraviolet laser cutting machine. Going to buy and discovering that the prices vary greatly, the main reason for the difference also comes from this.

Another important price determinant is the payment method and the extended warranty issue.

Payment method is the difference between one-time payment and post-acceptance payment and installment payment. For example, if we pay by credit card, the bank will charge us interest. FPC laser cutting machine manufacturers for installment payment customers, due to the pressure of the single payment, the long period of pressure payment, will add a certain fee on this basis. For extended customers, especially those with poor processing environment, the equipment is usually required to be extended, which will also incur a certain cost.

The above two factors are the main factors that feel the FPC laser cutting machine, of course, there are other factors, such as the labor costs of various companies. At the same time, SMTfly reminded that, do not think that the pursuit of low-cost strategy, in such an era, a penny of goods reflected in the most vivid, buy equipment still have to consider the use of cycle, accuracy, quality and other issues, price pressure Too low, some manufacturers can only make a fuss on spare parts.