Important! What causes the Fully Automatic PCB Router Machine to always be a broken cutter?

First, determine the router milling cutter

1. There is nothing wrong with the specifications of the milling cutter used in the automatic routing machine;

2. Is the blade installed correctly?

3. Whether the quality of the milling cutter reaches the standard;

Then, check the PCB Router milling cutter

Whether there is copper wire in the PCB board;

Check if the thickness of the PCB matches the thickness of the milling cutter;

For detailed analysis, please contact SMTfly technicians.

Then it is to check the hardness of the board and whether the cutter head is too tightly loaded, which will also affect the broken knife;

Check if the card spindle is the cause of the spindle;

Check if the software has not been updated, or if there are other issues.

The Automatic PCB Router Machine always has the problem of broken milling cutter; the broken milling cutter involves many factors, and it is closely related to the material of the milling cutter, the matching precision of the spindle, whether it is executed according to the manual of the operation specification.

SMTfly Automation Equipment Co., Ltd. specializes in the production of automatic PCB Separator machine for 15 years. The details can be sent to SMTfly customer service transfer technology for consultation, free consultation!